Nesh Industries (GSTIN: 24AUQPP5888B2Z4), a wire rope manufacturer based in Mehsana, Gujarat, manufactures galvanized and ungalvanized steel wire ropes to IS 2266:2002 standards for industrial lifting, crane, mining, and material-handling applications across India. Call +91 99094 95768.
Explore our range of high-quality wire rope manufacturer in mehsana, gujarat engineered for industrial efficiency.

Corrosion-resistant finish

High-strength steel core

Versatile industrial applications
The 6×19 construction — six strands of 19 wires each — is the most widely used general-purpose wire rope in Indian industry. Nesh Industries manufactures 6×19 wire rope in diameters from 8 mm to 40 mm with Fiber Core (FC) or Independent Wire Rope Core (IWRC). The IWRC variant delivers approximately 7.5% higher breaking force and superior crush resistance on multi-layer drums. Both variants conform to IS 2266:2002 in IPS and EIPS wire grades. Primary applications: EOT crane hoisting ropes, material handling hoists, construction site lifting.
The 6×36 construction uses six strands of 36 finer wires each, making it significantly more flexible than 6×19 for the same diameter. Nesh Industries manufactures 6×36 wire rope in diameters from 12 mm to 52 mm with IWRC core as standard — essential to prevent internal strand collapse under repeated bending fatigue. The finer wire enables tighter bending radii over smaller sheaves, making 6×36 the correct specification for container cranes, tower cranes, and multi-layer drum winches. Wire grade is EIPS to IS 2266:2002.
The 6×7 construction — six strands of 7 wires each — produces the most rigid and abrasion-resistant wire rope in the standard range. The large individual wire diameter maximizes surface abrasion resistance, but this construction is not suitable for bending over sheaves or drums. Nesh Industries manufactures 6×7 wire rope in diameters from 6 mm to 20 mm for standing ropes, guy wires, antenna stays, mast bracing, and derrick guys. Wire grade is IPS; IS 2266:2002 compliance applies.
For applications requiring maximum crush resistance on multi-layer drum winches — offshore platform cranes, deep-sea marine winches, and mine shaft hoisting — Nesh Industries supplies 8×19 and 8×36 constructions in diameters from 16 mm to 52 mm. The eight-strand arrangement distributes load more evenly across the drum, reducing inter-layer crushing and extending rope service life significantly in demanding winding applications. Both IWRC and spiral strand cores are available.
All wire rope manufactured by Nesh Industries conforms to IS 2266:2002 — Steel Wire Ropes for General Engineering Purposes — the primary Indian standard governing rope construction, dimensional tolerances, breaking force, and elongation. Galvanized wire rope is supplied with zinc coating per IS 1835 Class A (heavy coating) for maximum corrosion protection. Each supply lot is accompanied by a mill test certificate documenting the actual breaking force test result, rope diameter, construction, wire grade, and batch number. Wire grades supplied are IPS (Improved Plow Steel) and EIPS (Extra Improved Plow Steel) — EIPS providing approximately 10% higher nominal breaking strength at the same diameter. Core types are Fiber Core (FC) for flexibility and lubrication retention, and Independent Wire Rope Core (IWRC) for crush resistance and approximately 7.5% higher breaking force. Tax invoices are issued under GSTIN 24AUQPP5888B2Z4 with full HSN code compliance.
Nesh Industries supplies wire rope for EOT (Electric Overhead Travelling) cranes, mobile cranes, and tower cranes in 6×19 IWRC and 6×36 IWRC EIPS grade from 16 mm to 40 mm diameter. Industrial hoists, chain blocks, and winch systems use 8 mm to 25 mm rope in FC or IWRC construction. Sling assemblies — single-leg, two-leg, and multi-leg configurations — are fabricated from wire rope cut to length with swaged ferrule or pressed socket terminations. Mine haulage ropes and shaft winding systems in quarrying operations use 28 mm to 52 mm diameter in 6×7 and 6×19 constructions. Port installations at Mundra, Kandla, and Hazira require galvanized Class A specification for mooring winches and crane pendants. General construction site lifting across Gujarat and Rajasthan uses 10 mm to 20 mm rope in cut lengths or coil.
Nesh Industries is located at Mehsana, Gujarat — centrally positioned within North Gujarat's industrial belt with direct road access to Ahmedabad (75 km), Gandhinagar (60 km), and Palanpur (80 km). Wire rope is dispatched ex-Mehsana via road freight: standard delivery to Ahmedabad and Gandhinagar within 1–2 days, to Mumbai and Pune within 2–3 days, and to Rajasthan destinations within 2–4 days. For urgent breakdown supply, same-day dispatch is available for stocked diameters. Small-diameter rope (6–16 mm) is available from 100-metre minimum coil lengths; larger diameters (20 mm and above) from 50-metre minimum. Full drum reels of 500 m or 1,000 m are available for large-quantity procurement. Contact Nesh Industries at +91 99094 95768.
Nesh Industries proudly serves industrial clients across major infrastructure hubs. Our robust logistics network ensures timely delivery and technical support in the following areas:
Support
Global Export Available
Shipping high-performance parts to infrastructure projects worldwide.
Common inquiries regarding our wire rope manufacturer in mehsana, gujarat and manufacturing processes.
Contact our team today for a custom quote or technical consultation on our wire rope manufacturer in mehsana, gujarat.
Contact Us NowDiscover our other industrial high-performance products.
Get Our Latest Competitive Price List
Download our full catalogue to view updated rates for all Drum mix plant parts and Sling & Wire ropes.